Home > Heims & Spacers

HEIMS & SPACERS


These joints are simply the strongest and best available with superior load ratings. Body is built from Chrome Moly alloy steel, heat treated and coated for protection. The race is self lubricating and self cleaning. The ball is hardened bearing steel, heat treated, hard chrome plated and precision ground.


  • 1.50" Heim Joints

    1.50" x 1" 4130 Heat Treated Chromoly Heim Kit with Hex Bungs and Jam Nuts. Bung fits 2.5 DOM with .250 wall. 139.000 lb static load rating.
  • 1.25" Heim Joints

    These joints are simply the strongest and best available with superior load ratings. Body is built from Chrome Moly alloy steel.
  • 3/4" Heim Joints

    All of our Heims are 4130 Heat Treated Chromoly with a TEFLON-KEVLAR RACE, and are built to withstand over 78,000 LB. Radial static load.
  • 7/8" Heim Joints

    All of our Heims are 4130 Heat Treated Chromoly with a TEFLON-KEVLAR RACE, and are built to withstand over 78,000 LB. Radial static load.
  • FK Rod Ends

    FK style 1.25 x 1" rod ends are in. 108k lb Radial static load, with heat treated steel races instead of the injection molded nylon race.
  • Johnny Joints

    Johnny Joint rod ends offer 30 degrees of unrestricted movement in any direction, as compared to 22 degrees on common Heim joints
  • Bungs / Tube Adapters

    Threaded bungs are commonly used for rod ends or heim joints to create all sorts of linkage and are commonly used for all sorts.
  • Spacers

    Spacers increase the amount of angle that heim joints are able to achieve. Our misalignment & regular spacers are machined from stainless steel & carbon.